Skip to main content
2026 AMPP Annual Conference and Expo Main banner
Final Program


Advanced Program
Icon Legend
This session is not in your schedule.
This session is in your schedule. Click again to remove it.

  1. Home

  • 500 Series Standards Talk?
  • AC Interference
  • Advanced Concepts for Concrete Surface Preparation, Restoration, and Protective Lining Systems for Municipal Wastewater
  • Advanced Protective Coating Technology (Part I of IV)
  • Advanced Protective Coating Technology (Part II of IV)
  • Advanced Protective Coating Technology (Part III of IV)
  • Advanced Protective Coating Technology (Part IV of IV)
  • Advancements and Applications of Volatile/Vapor Corrosion Inhibitors (VCIs)
  • Advances in Materials for Oil and Gas Production (Part I of III)
  • Advances in Materials for Oil and Gas Production (Part II of III)
  • Advances in Materials for Oil and Gas Production (Part III of III)
  • Aerospace Corrosion Modeling and Environmental Severity
  • Anodic & Cathodic Protection
  • Atmospheric Corrosion and Environmentally Assisted Cracking
  • Bridge Preservation: New Technologies for Concrete and Steel Structures
  • Cathodic Protection Monitoring (Part I of II)
  • Cathodic Protection Monitoring (Part II of II)
  • Coating & Lining Failures Common and Unusual Causes of Premature Coating Failures (101)
  • Coating Failure Investigation Workshop – Finding the Cause or Repeating the Failure
  • Coating Failures
  • Coatings 101 Workshop
  • Coatings 101: Materials, Operations, and More
  • Corrosion and Corrosion Testing of Additively Manufactured Materials
  • Corrosion and Material Protection in Nuclear Systems
  • Corrosion in Carbon Capture, Transportation, and Utilization and Storage (CCTUS) (Part I of III)
  • Corrosion in Carbon Capture, Transportation, and Utilization and Storage (CCTUS) (Part II of III)
  • Corrosion in Carbon Capture, Transportation, and Utilization and Storage (CCTUS) (Part III of III)
  • Corrosion in the Biofuel and Biomass Industry
  • Corrosion Inhibitors in the Oil and Gas Industry (Part I of III)
  • Corrosion Inhibitors in the Oil and Gas Industry (Part II of III)
  • Corrosion Inhibitors in the Oil and Gas Industry (Part III of III)
  • Corrosion Management
  • Corrosion Management: Water Treatment, Desalination, Transmission, and Reuse
  • Corrosion of Reinforced Concrete Structures: Coatings and Concrete
  • Corrosion, Fatigue, and External Stress Cracking Under Thermal Insulations
  • CP in Offshore and Marine Environments
  • Data Challenges in Corrosion
  • DoD Case Studies: Military Infrastructure and Weapon Systems
  • Economics of Corrosion: Associated Direct and Indirect Costs
  • Electrochemical Techniques for Measuring Corrosion – Technical Forum
  • Environmentally Assisted Cracking (EAC)
  • Facilities Integrity and Process Safety
  • Gaseous Hydrogen Embrittlement (Part I of II)
  • Gaseous Hydrogen Embrittlement (Part II of II)
  • Geothermal Power
  • High-Temperature Materials and Corrosion Evaluation and Mitigation
  • How to get coatings approved for military usage (500 series)?
  • Hydrogen and Emerging Fuels — Material Compatibility
  • Impact of Corrosion on Wind, Solar, and Other Renewables
  • Internal Corrosion Management — Innovation and Emerging Technologies
  • Jobsite Challenges, Strategies, and Safety Programs
  • Machine Learning for Corrosion Management
  • Marine Coating Performance Under Pressure: Challenges and Innovations
  • Marine Corrosion and Performance Issues for Materials and Coatings
  • Material Selection and Qualification in CCS Downhole Environment (Part I of II)
  • Material Selection and Qualification in CCS Downhole Environment (Part II of II)
  • Materials Sustainability and Materials Stewardship Practices
  • Metallic Corrosion in the Water and Wastewater Industries
  • Microbiologically Influenced Corrosion (MIC)
  • New Developments and Recent Experiences With Nickel, Titanium, Zirconium, and Other High Alloyed Corrosion Resistant Materials
  • Next-Generation Coatings: Predictive Strategies for Service Life, Durability, and Sustainable Performance
  • Nonmetallic Materials in Chemical Processing and Oil and Gas Production
  • Oil Refining Industry Corrosion
  • OSHA 29 CFR 1926.1200 Confined Space Entry for Construction Workshop
  • Pipeline Integrity
  • Pipeline Safety and Asset Integrity Management
  • Preventing Failures in Structural Concrete: Corrosion, Coatings, and CP
  • Recent Experiences With Austenitic and Duplex Stainless Steels
  • Regional Issues in Materials and Integrity in Oil and Gas
  • Reinvention, Reentry, and Retention
  • SC 01 Cathodic/Anodic Protection
  • SC 02 External Coatings - Atmospheric
  • SC 03 External Coatings - Buried & Immersed
  • SC 04 Linings & Internal Coatings
  • SC 05 Surface Preparation
  • SC 06 Process Industries
  • SC 07 / TC 09 Defense & Aerospace
  • SC 08 Metallic Material Selection & Testing (Part I of IV)
  • SC 08 Metallic Material Selection & Testing (Part II of IV)
  • SC 08 Metallic Material Selection & Testing (Part III of IV)
  • SC 08 Metallic Material Selection & Testing (Part IV of IV)
  • SC 09 Non-metallic
  • SC 10 Asset Integrity Management
  • SC 11 Electric Power
  • SC 12 Concrete Infrastructure (Part I of IV)
  • SC 12 Concrete Infrastructure (Part II of IV)
  • SC 12 Concrete Infrastructure (Part III of IV)
  • SC 12 Concrete Infrastructure (Part IV of IV)
  • SC 13 Corrosion Monitoring & Measurement
  • SC 14 Oil and Gas - Upstream
  • SC 15 Pipelines & Tanks
  • SC 16 Oil and Gas - Downstream
  • SC 17 Rail & Land Transportation
  • SC 18 Water & Wastewater
  • SC 19 Maritime
  • SC 20 Internal Corrosion Management
  • SC 21 Mining & Mineral Processing
  • SC 22 Biodeterioration
  • SC 23 Coating System Application, Maintenance, and Inspection
  • SC 24 Environmental Health and Safety (EHS)/Regulatory
  • SC 25 Accreditation Standards
  • SC 26 Carbon Capture, Alternative Fuels, and Energy Storage
  • SC 27 Mechanical Insulation
  • Solid Particle Erosion and Erosion-Corrosion
  • Sustainablity Forum Hosted by the Sustainability Task Force
  • Sweet and Sour Corrosion (Part I of II)
  • Sweet and Sour Corrosion (Part II of II)
  • TC 01 TCI - Atmospheric Coatings
  • TC 01 TCI - Coating Inspection
  • TC 01 TCI - Linings, Immersion, and Buried Service Coatings
  • TC 01 TCI - Surface Preparation
  • TC 02 Cathodic Protection
  • TC 02 TCI - Cathodic Protection - Impact of Increased Electrical Transmission Loads
  • TC 02 TCI - Cathodic Protection - Interference
  • TC 02 TCI - Cathodic Protection - Monitoring
  • TC 02 TCI - Cathodic Protection - Offshore
  • TC 02 TCI - Cathodic Protection - Onshore
  • TC 02 TCI - Cathodic Protection - Reinforced Concrete Infrastructure
  • TC 03 TCI - Carbon Capture and Storage (CCS)
  • TC 03 TCI - Oil & Gas Corrosion & Scale Inhibition
  • TC 03 TCI - Oil & Gas Materials Selection & Metallurgy – Applications & Developments
  • TC 03 TCI - Oil & Gas Materials Selection & Metallurgy – Test Methods Learnings
  • TC 03 TCI - Oil & Gas Non-metallics & Coatings
  • TC 03 TCI - Oil & Gas Petroleum Refining and Gas Processing
  • TC 04 TCI - Concrete
  • TC 04 TCI - Construction
  • TC 04 TCI - Marine
  • TC 04 TCI - Municipal Water/Wastewater Infrastructure
  • TC 05 Corrosion in Mining and Minerals Processing
  • TC 05 Corrosion Management
  • TC 05 Global Asset Integrity Data Intelligence
  • TC 05 TCI - Monitoring, Measuring, and Inspection
  • TC 08 TCI - Renewable Energy (including Waste Energy)
  • TC 08 TCI - Robotic Inspection to Utilities
  • TC 08 Utilities
  • TC 10 Pipelines and Tanks
  • TC 10 Technical Exchange on Alignment with PHMSA Regulations under AMPP Guide 21569
  • TC 11 TCI - Additive Manufacturing
  • TC 11 TCI - Hydrogen
  • TC 11 TCI - Non-Metallics
  • TC 11 Technical Exchange on Stainless Steels
  • The Future of Coatings Inspection
  • Thermal and Cold Spray Coatings and Case Studies
  • Thermal and Cold Spray Processes and Applications in Corrosion Mitigation
  • Zinc Coatings and Case Studies for Asset Protection in Corrosive Atmospheric Conditions