Session: Metallic Corrosion in the Water and Wastewater Industries
Effect of Sand Particle Size on Soil-Side Corrosion Behavior of Aboveground Storage Tanks (C2026-00374)
Tuesday, March 17, 2026
11:00 AM - 11:30 AM Central
Location: 372 EF
Earn .5 PDH
Interested in reading the entire paper? Click on the "Paper" button below to read on the AMPP Knowledge Hub!
*Please note, if your registration came with access to the conference proceedings don't forget to login to your AMPP Knowledge Hub account to access the paper for free. If you login and don't have access to the paper, you can purchase the individual paper or purchase the entire conference proceedings on your Knowledge Hub account.
Soil-side corrosion poses a significant challenge for operators of Aboveground Storage Tanks (ASTs), particularly affecting the bottom plates. The objective of this research is to investigate the effect of sand particle size and water saturation level on the corrosion behavior of AST bottom plates. Sand particle sizes ranging from 1.18 mm to 0.150 mm were investigated under 50% and 75% water saturation. Sands with 30 ppm chloride and 15 ppm sulfate content were selected for the study. ASTM A36 carbon steel coupons were exposed for 2 and 7 months. Weight loss measurements and pit depth analysis were conducted to evaluate corrosion damage. Additionally, carbon steel coupons were exposed in a salt solution containing 30 ppm chloride and 15 ppm sulfate to establish baseline corrosion rate. Profilometry was used to scan coupon surfaces, identifying the deepest pits, and determining the maximum pitting rate for various sand particle sizes and water saturation levels. The results from this study will help to identify optimal sand particles sizes that could be potentially less corrosive compared to the current practices and reduce the corrosion severity of future storage tanks.
