Electrical Safety and Facility Integrity: Evaluation of AC Power & Grounding Issues (C2026-00388)
Tuesday, March 17, 2026
9:30 AM - 10:00 AM Central
Location: 342 C
Earn .5 PDH
Interested in reading the entire paper? Click on the "Paper" button below to read on the AMPP Knowledge Hub!
*Please note, if your registration came with access to the conference proceedings don't forget to login to your AMPP Knowledge Hub account to access the paper for free. If you login and don't have access to the paper, you can purchase the individual paper or purchase the entire conference proceedings on your Knowledge Hub account.
AC Power Grid electrical grounding is purposely joined to/gets electrically coupled with below-grade metal assets, and sometimes with cathodic protection (CP) systems. The typical North American power grid is supplied by 60-cycle-per-second (or Hertz, Hz) alternating current (AC) electricity. Larger facilities are usually receiving three-phase AC power, with three separate power-delivering legs and one common neutral wire. At a large oilfield water management facility in West Texas, two studies were needed. For one, AC power grounding conductors on site were showing large AC current flows, in the range of 3.5 to 18 amperes (A) AC with significant fluctuations. At the same time, various copper grounding and bonding wire damage patterns were observed, mainly in relation to a salty produced-water spill inside one secondary containment structure which housed at least 12 API-12F above-ground storage tanks (ASTs). The operator wanted assurance that on-site electrical grounding was working effectively, and to be advised whether grounding and bonding repairs were needed. A later site shut-down and facility maintenance/repair event identified a starter motor, operating with 60-Hz power, with a partial electrical fault. That fault condition flowed only about 1.5 A AC, a possibly lethal current level.
